Wisconsin No Slip Floors uses a uniquely formulated chemical compound designed to react with silica sand in any mineral surface such as concrete, ceramic tile, terrazzo, marble, porcelain, slate, quarry tile, river rock, polished stone, or glazed brick. The result of the chemical reaction with the surface is a creation of a tread pattern that provides a positive slip resistant surface.
Our treatments can be safely applied and reapplied without jeopardizing the structural composition of the material on which it is applied. Many other slip-proofing solutions are applied topically and eventually crack, peel or rub off. Ours works into the surface itself so it will not crack, peal, chip, or discolor with age.
There is no set up, curing, or drying time required. The surfaces treated can be used immediately after treatment. Each treatment is guaranteed for two years from the date of application as long as the surface is maintained with approved cleaning agents. Our Treatment creates a "Tread Pattern" that makes your surfaces Slip-Resistant. All mineral-based surfaces are porous by nature. When treated, the natural pores are widened and deepened to create a tread pattern that is not slippery. | |
No Slip
Treatment for:
• Hard Mineral
• Textured Epoxy
• No Slip Water Based Sealer/Finish
• No Slip Water Based Sealer/Finish with Aggregate
|
